장바구니에 추가된 상품은 재고가 있으며 즉시 배송 가능합니다.

$75 이상 주문 시 미국 본토 지역은 무료 배송

텅스텐 다이얼로이 (W Ni Mo Fe)

These alloys contain 90% tungsten with nickel, molybdenum, and iron added. Unlike pure tungsten, heavy alloy can be conventionally machined and is less expensive.

Three tungsten alloy sheet and plate pieces of increasing thickness stacked and fanned out

MT-17D 텅스텐 다이알로이 개요

MT-17D 텅스텐 다이얼로이는 다이캐스팅 응용 분야에 이상적입니다. 니켈, 몰리브덴, 철 매트릭스에 텅스텐이 90% 함유되어 있습니다. MTS는 고객님의 사양에 맞춰 모든 합금을 맞춤형으로 가공하여 완제품으로 제작할 수 있습니다. 당사는 방대한 텅스텐 합금 재고를 보유하고 있으며, 재고가 없는 품목에 대해서도 신속한 납기를 제공합니다.

텅스텐 다이얼로이의 특성 및 용도

텅스텐 다이얼로이의 장점

  • 주조 속도 향상
  • 금형 수명 연장
  • 불량 감소로 효율 극대화

텅스텐 다이얼로이 특성

Material NameMT-17D Tungsten DieAlloy
Composition90% tungsten, balance nickel, molybdenum and iron
Densityabout 17.0–17.3 g/cm³ (0.614–0.625 lb/in³)
Hardness, Rockwell C (typical)about 34
Ultimate Tensile Strength (typical)about 138,000 psi (950 MPa)
Yield Strength 0.2% (typical)about 94,000 psi (650 MPa)
Elongation (typical)about 5%
MagneticSlightly magnetic

Typical values for 90% tungsten / nickel-molybdenum-iron die alloys from published producer data; actual properties are reported on MTS material certifications, available on request with purchase.

맞춤형 텅스텐 다이얼로이 솔루션

텅스텐은 극도로 단단하고 녹는점이 높아 가공이 매우 까다로운 것으로 알려져 있지만, 당사의 숙련된 팀은 이 "가공이 불가능한" 금속을 다루는 데 특화되어 있습니다. 다축 CNC 밀링과 첨단 EDM 드릴링을 결합하여, ±0.0005"만큼 정밀한 공차로 고객님의 도면에 정확히 부합하는 복잡한 텅스텐 부품을 제작합니다. 맞춤형 원자재든 정교한 완제품이든, 업계 최고 수준의 속도로 정밀하게 설계된 솔루션을 제공합니다.

텅스텐 다이얼로이 리소스

더 보기

독점 제품 정보 및 혜택 받기

MTS의 재고 업데이트 및 특별 할인 혜택을 가장 먼저 받아보세요